Overall Rating: 9/10 | Best for: Anti-aging, collagen stimulation, and hormonal acne
Disclosure: Project E Beauty gifted me this mask to test. As always, my review reflects my honest personal experience. This post contains affiliate links – I may earn a small commission if you buy through them, at no extra cost to you.
The Project E Beauty LumaLux Face is one of the most spec-heavy LED masks on the market – 800 LEDs, five clinically studied wavelengths, and a 1072nm deep infrared setting that most masks don’t offer. As someone in my 40s dealing with the skin changes perimenopause brings, I am very excited to use this mask.
I already own the Nanoleaf LED Light Therapy Face Mask (check out my full review), so it was great to compare both masks. The LumaLux costs roughly double, so the question was simple – is it worth the price difference?
I have been testing the mask for over a month now, and it definitely did not disappoint. I will share everything I have found in this review, including an exclusive 15% discount code.
TL;DR
The Project E Beauty LumaLux Face is the most feature-packed LED mask I have tested – 800 LEDs, five clinically studied wavelengths, and a 1072nm deep infrared setting that reaches deeper skin layers. The design is premium, the eye protection is the most comfortable I have tried, and 6-minute sessions fit easily into any routine. It is not perfect – no FDA clearance yet, and the nose piece can dig in slightly – but for women over 40 focused on anti-aging and collagen support, it is one of the best red light therapy masks.
First Impressions
Same as the Project E Alora panel, the mask is packaged beautifully, and it does feel premium when you open the box. Attention to detail is seen throughout the packaging, the way everything is presented, and the feel of the product.
There was a bit of a plastic smell after I opened the box. It was gone very quickly, and I did not notice it on my first use.
What’s in the Box
In the box you receive:
- The mask
- The controller with a charger
- A soft pouch for travelling and storing
- A thank you card
- A user manual
- A small sample of hyaluronic acid serum
Project E Beauty LumaLux Face Specifications
Let’s break down the specifications and what they actually mean.
Most Researched Wavelengths
850nm (NIR) is the gold standard in light therapy research. It is one of the most studied wavelengths for mitochondrial function (cytochrome c oxidase activation), collagen stimulation, and deeper tissue penetration. This is the one you really want to see on a mask.
630nm (Red) falls within the therapeutic window (620-660nm), though it sits at the lower end, it is still research-backed. It is more surface-level than 660nm but effective for skin-level benefits like collagen and inflammation.
460nm (Blue) is well within the studied range (415-470nm) for acne-related benefits – specifically targeting P. acnes bacteria. Great if you are suffering from acne. Please note that it might not be as effective with hormonal acne; however, I noticed massive improvements.
Less Proven but Interesting Wavelengths
1072nm (Deep Infrared) is what stands out the most in this mask’s specifications. It takes the LumaLux into the same tier as masks like CurrentBody or JOVS, but at a more accessible price. There is some literature around 1060-1080nm, but it is far less researched than 850nm. That said, theoretically, a deeper wavelength should reach even deeper layers of the skin and help even more with aging. For women over 40 dealing with declining collagen production, reaching those deeper layers could be meaningful long-term. I cover why this matters specifically for perimenopause skin further down.
520nm (Green) has some emerging research around hyperpigmentation and redness (1), but the evidence base is much thinner compared to red and NIR. I have not used the green light jet, but I am excited to see if it will help my pigmentation.
The combo colours (purple, cyan, yellow, white) are just mixtures of the above LEDs working simultaneously. They are not separate therapeutic wavelengths – it is a marketing-friendly way to list 9 “modes” instead of 5. Will I be using them? I don’t think so. I would rather focus on proven wavelengths as my skin is quite sensitive and I don’t want to overdo it.
Number of LEDs in LumaLux Mask
800 LEDs is one of the highest counts I have seen in an at-home Red Light Therapy mask. This allows the mask to have light sources very close to each other and cover the skin in good density without missing any part of the face. For context, the Nanoleaf mask has 432 LEDs (108 bulbs with 4 chips each), and the industry average sits around 160-200. More LEDs mean more even distribution with fewer gaps between light sources.
LumaLux Power Density
To understand what 30mW/cm² actually means, we need to do a bit of simple maths. The therapeutic dose is measured in joules per cm² (fluence), and the formula is straightforward: power density x time = dose.
At 30mW/cm²:
- 3 minutes (180s): 5.4 J/cm²
- 6 minutes (360s): 10.8 J/cm²
Most clinical studies on skin-level benefits (collagen, inflammation, acne) show results in the 3-15 J/cm² range. So both the 3-minute and 6-minute settings land squarely within the therapeutic window.
However, I do want to flag something. An independent reviewer (Light Therapy Insiders) measured the LumaLux’s actual delivered dose at 3.8 J/cm² in 3 minutes using a spectrometer – lower than the calculated 5.4 J/cm². That is pretty common with LED masks – advertised power density is usually peak, not average across the surface. It is not a big deal, but for the best results, I use the mask for 6 minutes rather than 3 per session.
Why the LumaLux is great for Women Over 40 and Perimenopause Skin
As a certified menopause coaching specialist (CSMC) and nutrition coach (PN1-NC), it is one I feel qualified to talk about midlife skin.
During perimenopause, declining estrogen affects your skin in several ways. Collagen production slows down, and the fibroblasts (the cells responsible for producing collagen and elastin) become less active. Skin becomes thinner, drier, and slower to heal. And many women experience hormonal acne for the first time since their teens.
That’s why I love LumaLux’s triple-wavelength anti-aging mode (630nm + 850nm + 1072nm). The 850nm NIR reaches the dermis where fibroblasts live. The 1072nm deep infrared potentially reaches even deeper into the dermal layer. Together with the surface-level 630nm red, you are stimulating skin repair at multiple depths during the same treatment.
The 800 LED count is also important. Collagen loss during perimenopause does not happen in patches – it is happening across the entire face, and this mask covers a lot of it, without any gaps.
For hormonal acne specifically, the blue mode at 460nm targets the P. acnes bacteria responsible for breakouts. Research supports that blue light alone is effective for killing bacteria – it does not need to be paired with other wavelengths for that specific job. However, perimenopause acne comes with a different skin environment than acne at 20. Thinner skin, slower healing, and more inflammation mean the post-breakout recovery matters just as much as the bacteria kill. So ideally, you would want the blue light combined with NIR, but you can also use purple light that combines blue and red.
LumaLux Mask Design
You can feel the company’s years of experience in the design. The mask is not only beautiful and soft to touch, but it also has very strategically placed LEDs. It is easy to adjust to your face. The proportions sit very well, and the mask covers all the spots you need – including the lip area, which is not covered in many masks.
Built-in Eye Protection
I studied product design in university, and this detail made me properly geek out. The way the eye protectors slide into the eye cutouts is just beautiful. Also, the protectors themselves are so soft that there is no discomfort from wearing them. This is a genuine design win compared to some other masks where eye protection feels like an afterthought.
Controller
The controller is elegant and feels luxurious. I love the soft-lit numbers and the soft edges that are easy to slide into a pocket. It is not complicated – all you have are two beautiful and functional buttons. They are both the size of your finger, so neither is too big nor too small. Charging is straightforward, although it does take a few hours, but that is really not a big deal. I love that the controller has two ports, so if you buy the decolletage piece, you will not need two remotes – you can plug both devices into one.
The Fit
It takes a bit of adjustment the first time, but the mask fits very well on the face. I love that the mask covers the lips. Yes, I cannot drink my coffee while wearing it, but I love that it is treating the lip area. The straps fit very comfortably and are easy to adjust. They also feel very good quality and well designed, with reinforced stitching that I know will last for a long time.
My Daily Routine
I like to use my Project E LumaLux mask in the morning. I put it on straight after I wash my face and keep it on while I make my morning coffee or tea and do my morning stretches. On slower mornings, I also like to combine my face treatment with body sessions using my Project E Alora Age Renewal LED Light Therapy Panel (check out my review).
If the morning is too busy, I use it in the afternoon while reading a book or working. As it does not take a lot of time, and I can do pretty much everything with the mask on, I have been very consistent with its use.
I use the deep rejuvenation mode (red + infrared + deep infrared) as my daily go-to for anti-aging, set at 6 minutes. On days when I have active hormonal breakouts, I switch to the blue mode for a separate 3-minute session.
What I Love about LumaLux Face Led Mask
Amount and Placement of the Lights
With 800 LEDs, this mask has one of the largest numbers of LEDs in a mask. I love the placement of the lights as they are focusing on the areas you need the most – forehead, crow’s feet, frown lines, and around the mouth. More lights mean a more even distribution all over your face, with no gaps in coverage.
Lip Coverage
Lips are one of the areas you can start seeing aging first, with smoker lines forming even if you don’t smoke but use a straw a lot. This is one of the key differences from other masks, where the lips are not as covered. Yes, you cannot sip coffee during the treatment, but with 3 to 6 minutes, it is not a big deal.
Treatment Times
With so many lights and the deep infrared wavelength, treatment time is way less than that of many competitors. You can choose from 2 options – 3 minutes or 6. I always go for six, and to be honest, they fly by. The 3-minute setting is also great for mornings when you are rushing through the door but still want to treat your skin.
Simplicity of Use
Some mask manufacturers tend to overcomplicate the settings. With the LumaLux Face, everything is very straightforward. There are two buttons – one for time, one for the light colour. That is it.
Warranty and Returns
The mask comes with a 2-year warranty against manufacturer defects and a 60-day love-it-or-return-it guarantee. Both are among the stronger terms in this category and give you confidence to try it properly.
What Could Be Better
Nose Part
Unfortunately, the way the nose section is designed, it digs into my nose slightly. It is not a big deal, but after 6 minutes of use, my nose gets a bit red. Is it painful? No. Is it uncomfortable? Not for this short of time. So I really don’t mind it, but I want to flag it in case you have a slightly larger nose. If I try to position it to avoid this, the mask sits a bit looser and can slide off the face.
No Always-On NIR in Every Mode
This is where a competitor like Nanoleaf has a smarter design. The Nanoleaf pairs 850nm NIR into every single mode, so even when you run blue for acne, you are getting deep tissue stimulation alongside it. The LumaLux treats wavelengths more independently – if you run blue, you only get blue. For perimenopause skin, where inflammation recovery is slower, having NIR running alongside acne treatment would be ideal. You can work around this by doing a separate red/infrared session, but it is an extra step.
Not FDA Cleared
The LumaLux Face mask is not FDA-cleared yet, although customer support assured me that the application is in process. It does have IEC 62471 certification for eye safety and IEC 60601-1-2 for electromagnetic compatibility, which are respected international standards.
Results
I will be updating this section with before-and-after photos after 12 weeks of consistent use. I feel you need to use the mask for a few months to see results that are noticeable in photos.
However, even after a few weeks, I could notice subtle changes in my skin – it feels more bouncy and even. I was noticing changes in skin much more slowly with the Nanoleaf red light therapy mask, which is not surprising given this mask has nearly double the LEDs and a deeper infrared wavelength, treating even deeper layers of the skin.
I have also had quite a few compliments from people who have not seen me for a while, saying that I look fresher and younger. Take that as you will – it is anecdotal, but it is nice to hear.
Where to Buy and a discount code
The Project E Beauty LumaLux Face retails at $369. It is not cheap, but it sits nicely in the middle of the market, well below the $600-700 range of CurrentBody and JOVS, while offering specs that compete with them.
Use my exclusive discount code BAREFOOTBASIL15 at checkout for 15% off your order. Use the button below to place the order.
If you want to compare more mask prices and specifications, check out: Best Red Light Therapy Masks of 2026.
Who Should Buy the Project E LumaLux Face Mask?
Buy it if:
- You want to invest in a high-quality mask, but don’t want to spend $600-700
- Your key focus is anti-aging and collagen stimulation
- You want to treat your lips and the area around your mouth
- You want a lot of LED coverage
- You are over 40 and want a mask with deeper infrared wavelengths for perimenopause skin changes
Skip it if:
- You want to use your mask while sipping your morning coffee or matcha
- You are on a tight budget, and this is a significant investment for you
- You have a larger nose – the mask may not sit as comfortably ( but you can always try it out and send it back if you don’t find it comfortable)
- FDA clearance is a key factor for you
If You Are Not Sure Whether to Get a Red Light Therapy Mask or a Panel
I have created a few resources that will help you decide:
Red Light Therapy Mask or Panel: All You Need To Know Before Buying
I have also reviewed the Project E Alora Age Renewal LED Light Therapy Panel
How Does the Project E LumaLux Face Compare to the Nanoleaf Mask?
As I own both masks, here’s the simple breakdown to help you decide.
They’re both excellent – but built differently.
- Nanoleaf: fewer LEDs (432) but more powerful, using multi-chip bulbs (RGB + 850nm NIR in every mode)
- LumaLux: nearly double the LEDs (800), more evenly distributed, but each LED delivers a single wavelength
This leads to a key trade-off:
- Nanoleaf = higher intensity + built-in NIR in every mode
- LumaLux = better coverage + more targeted placement on aging areas
Power vs dose (this is where it gets interesting):
Nanoleaf runs stronger (78-103 mW/cm²), while LumaLux is lower (30 mW/cm²).
But more power is not always better.
- LumaLux (6 min): ~10.8 J/cm² – right in the clinically effective range
- Nanoleaf (5 min): ~27-30 J/cm² – potentially higher than optimal
With light therapy, overdosing can actually reduce benefits, so this isn’t a clear win for Nanoleaf.
Where LumaLux stands out:
- Includes 1072nm deep infrared, which reaches deeper skin layers (not available in Nanoleaf)
- More LED coverage across key aging zones
Where Nanoleaf stands out:
- Better for hormonal acne
- Blue light (460nm) is always paired with 850nm NIR, supporting inflammation recovery
Bottom line
- Choose Nanoleaf if you want versatility, adjustable intensity, and better support for breakouts
- Choose LumaLux if your focus is on anti-aging, deeper skin stimulation, and maximum coverage
Personally, I use both – LumaLux for daily anti-aging, and Nanoleaf on breakout days.
Read my full Nanoleaf LED Light Therapy Face Mask review for a deeper look at that mask.
Lumalux Mask FAQ
Is the Project E LumaLux mask good for perimenopause skin?
Yes, it is. The triple-wavelength anti-aging mode (630nm red + 850nm infrared + 1072nm deep infrared) targets collagen production at multiple skin depths in the same treatment. During perimenopause, estrogen decline leads to reduced collagen production and less active fibroblasts. The 1072nm deep infrared specifically reaches the deeper dermal layer where those fibroblasts live. The 800 LED count also ensures even coverage across the entire face, which matters because collagen loss happens all over the face.
Is 30mW/cm² enough for anti-aging results?
Yes. While it is lower than some competitors, power density is only part of the equation. What matters is the total dose delivered per session, measured in joules per cm². At 30mW/cm² for 6 minutes, you get roughly 10.8 J/cm², which sits right in the middle of the 3-15 J/cm² optimal range found in most clinical studies. Higher power density may actually reduce effectiveness.
Should I use the 3-minute or 6-minute setting?
I recommend 6 minutes for the best results. An independent reviewer measured the actual delivered dose at 3.8 J/cm² in 3 minutes, which is at the lower end of the therapeutic range. At 6 minutes, you are comfortably within the 3-15 J/cm² sweet spot where most clinical studies show results.
Can I use multiple modes in one session?
Project E Beauty recommends limiting treatments to two modes per day. Each mode runs for 3-6 minutes. Exceeding this will not have better results, but can cause skin irritation.
Is the LumaLux Face mask FDA-cleared?
Not yet, although Project E Beauty’s customer support confirmed the application is in process. The mask does hold IEC 62471 certification for eye safety and IEC 60601-1-2 for electromagnetic compatibility.
Safety and Who Should Avoid Red Light Therapy
Red light therapy is generally considered safe for all skin types, but some people should consult their doctor first. If you are taking photosensitising medications (certain antibiotics, retinoids, or acne treatments that increase light sensitivity), if you have a history of skin cancer or active lesions in the treatment area, if you have epilepsy or are prone to seizures, or if you are pregnant (there is not enough research to confirm safety during pregnancy). Most brands recomend to wear eye protection during treatments and never looking directly at the LEDs.
References
- Mima, Y., Yamada, T., Omatsu, J., Yamashita, T., Suzuki, S., Takechi, T., Ichikawa, M., Yamazaki, K., Sato, S., & Yoshizaki, A. (2025). Inhibitory Effect of 505 nm Green Light Emitting Diode on Melanin Synthesis in Cellular Experiments and a Human Intervention Study. Acta Dermato-Venereologica, 105. https://doi.org/10.2340/actadv.v105.43441.
Silvija Meilunaite, PN1-NC, CSMC, is a certified nutrition coach and menopause coaching specialist writing from personal experience of perimenopause. She covers midlife health, hormone-supportive nutrition, and non-toxic living with a research-driven approach, helping women over 40 feel informed, strong, and healthy.
